Wi-Fi does not have Valid IP Configuration setting Windows 10:
In the era of the wireless technology, it’s forever a decent choice to have a Wi-Fi connection Working with your laptop. When connecting the WLAN to computer, Wi-Fi doesn’t have a valid IP configuration, is one of the most recurring error.
Wireless connection is much essential as it gives you the freedom to move all around carrying your laptop or other devices without being connected to wires. Wi-Fi is a quite useful thing these days.
Many Win 10 users are Complaining regarding the Wi-Fi Connectivity issue, and the error that occurs is the Wi-Fi doesn’t have a valid IP configuration error message. This error really doesn’t allow you to get connected with the WLAN connection. In this guide, you’ll learn entirely about how to fix the Wi-Fi issue in your windows 10.
How to fix Wi-Fi doesn’t have valid IP configuration in windows 10?
When you attempt to connect to the WLAN, and it shows the error message “Wi-Fi doesn’t have a valid IP configuration” in windows 10, then you have nothing to worry about. This is an elementary and tiny mistake that has been occurred because of a Minimal level of setting misconfiguration. In order to remove this error message, you need to follow the steps below.
We have several solutions to the issue that gives you the WLAN doesn’t have a valid IP configuration error message. There are mainly six major types of solution for the respective, and you can make the error gone by yourself. No need to contact the expert. We are the experts in this field and just keep reading.
These area unit the enlisted Solution for your issue of WLAN doesn’t have a Valid IP.
1. Reset Your TCP or IP Protocol in Windows 10:
This is the best method by that you’ll be able to eliminate the wireless network don’t have valid IP error. You can eliminate this error by simply using ‘netsh command prompt.’ Follow the below-listed steps, and then you are good to go,
Go running, and start Command Prompt. You can also use Windows key + X, and then choose the command prompt menu as an administrator.
Wi-Fi-valid-IP-configuration-admin
When your command prompts open, then enter the following lines into it,
netsh winsock reset
Wi-fi-valid-ip-configuration-netsh-1
netsh int ip reset
wi-fi-valid-ip-configuration-netsh-2
Close Command Prompt and restart your PC.
You’ll all be done, now simply Connect your Wi-Fi network without any issues.
This Process can simply solve out the issues with IP configuration problem. However, this method is limited to the static IP addresses only. In such cases, you have to make a change to command prompt again and again. So we recommend that you just follow another step for this valid IP address configuration error in windows ten.
You can use these listed commands as well that can also solve your problem over here.
ipconfig /release
ipconfig /flushdns
ipconfig /renew
2. Change Wireless Network ESSID (Wi-Fi Name) and Password in Windows 10
In Win 10, there is also another method when your Wi-Fi doesn’t have Valid IP configuration, then you can change the SSID and the password of your Wi-Fi. This will create it like a new network for your pc, and it will not probably show the invalid IP error to your computer. This methodology also can be effective in different windows version too.
To carry out this method, you have to connect your mode with your pc. You can do this by Ethernet cable connection. After you have Successfully connected your Modem then you shall simply access your it the Change the network SSID and the Password. This will serve your purpose for the fix of valid IP configuration error on your pc.
3. Change Channel Width value to Auto
Another nice Solution for your correcting the error of wireless network Connection doesn’t have a Valid IP configuration is by creating the width of the Modem channel to Auto. You can do that too by yourself by following the steps below:
Press [Windows Key Logo + X] and Select “Network Connections” from the menu.
Right click on your wireless Option once windows open. Now you have to navigate to properties on the menu.
Now click the Configure button and than head to the “Advanced” tab.
Locate 802.11n Channel Width for 2.4 GHz band and set it to Auto.
Click OK to save changes.
4. Manually set your IP Address
Every wireless network has its IP address. The process of generation of the unique IP for the wireless modem is generated by DHCP. Sometimes an error Occurs in DHCP or with its configuration. If this issue happens then also there comes the error for IP configuration. You can get rid of this error by manually setting the IP address of your Modem. You can do that by following the steps below
- Wi-Fi doesn’t have a valid ip configuration
- Press [Windows Logo Key + X] and now Select “Network Connections”.
- Right-click your wireless network and select Properties from the menu.
- Select Internet Protocol Version 4 (TCP/IPv4) and click the Properties button.
- Once “Properties” window opens, Select the “Use the following IP address” option and enter the IP address.
- Subnet mask and Default gateway.
- After you’re done, click the OK button.
- Alternatively, you’ll access your router and switch off DHCP and Configure it to assign a static IP address to your computer.
Leave a Reply